Sanyo PLC-XE45 Owner's Manual

Also see for Think GAIA PLC-XE45: Technical details Service manual

Contents

DisplayBlue backPress the Point 7 8 buttons to switch on/off. When thisfunction is “On,” a blue image is displayed while the inputsignal is not detected.KeystonePress the MENU button to display the On-ScreenMenu. Use the Point 7 8 buttons to move the redframe pointer to the Setting Menu icon.12LanguageThe language used in the On-Screen Menu is availablein English, German, French, Italian, Spanish, Portuguese,Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,Russian, Chinese, Korean, or Japanese.Set the red framedpointer to the itemand press theSELECT button.Use the Point ed buttons to move the red framepointer to the item that you want to set and then pressthe SELECT button. The Setting dialog box appears.SELECTbuttonPress the SELECT buttonat Language item, theLanguage Menu appears.Setting Menu (Language)Setting MenuiconThis function corrects distortion of a projected image.Select either Store or Reset with the Point 7 8 buttons, andthen press the SELECT button. The keystone dialog boxappears. Correct keystone with the Point ed buttons (p.22).Store…… Store the keystone correction even when theAC power cord is unplugged.Reset……Reset the keystone correction when the ACpower cord is unplugged.SettingThis projector has Setting menu that allows you to set upthe other various functions described as follows:Press the SELECTbutton at this itemto display the otherlanguages.Press the Point 7 8 buttons to switch on/off. This functiondecides to display the On-Screen Displays.On ………………… Display all the On-Screen Displays.Use this function when you wantto project images after the lampbecomes bright enough. This mode isset as a default.Countdown off… Display the input image instead ofthe countdown when turning on theprojector. Use this function when youwant to project the image as early aspossible even when the lamp is notbright enough.Off…………………Do not show the On-Screen Displays.except:●On-Screen Menu● “Power off?”●P-Timer● “No signal” for Power management item (p.45)●”Please wait...”●Arrows for panning mode (pp.32–33)Press the SELECTbutton at this item toclose the dialog box.41Setting