Sanyo PLC-XE45 Owner's Manual

Also see for Think GAIA PLC-XE45: Technical details Service manual

Contents

6Moving the ProjectorWhen moving the projector, replace the lens cover andretract the adjustable feet to prevent damage to thelens and cabinet. When the projector is not in use foran extended period, put it into a suitable case.Handle the projector carefully; do not drop, bump,subject it to strong forces, or put other things on thecabinet.Do not roll the projector more than20 degrees from side to side.Do not point the projector up toproject an image.Do not point the projector down toproject an image.Do not put the projector on eitherside to project an image.Install the projector properly. Improper Installation mayreduce the lamp life and cause fire hazard.Installing the Projector in Proper PositionOpenings in the cabinet are provided for ventilation. Toensure reliable operation of the product and to protect itfrom overheating, these openings must not be blockedor covered.Air Circulation20˚20˚Air IntakeVentExhaust Vent(Hot air exhaust)Exhaust Vent(Hot air exhaust)Air IntakeVentCAUTIONHot air is exhausted from the exhaust vent. Whenusing or installing the projector, the followingprecautions should be taken.– Do not put any flammable objects or spray cannear the projector. Hot air is exhausted from the airvents.– Keep the exhaust vent at least 3’ (1 m) away fromany objects.– Do not touch a peripheral part of the exhaust vent,especially screws and metallic part. This area willbecome hot while the projector is being used.– Do not put anything on the projector. Objects puton the cabinet will not only get damaged but alsomay cause fire hazard by heat.Cooling fans are provided to cool down the projector.The fan’s running speed is changed according to thetemperature inside the projector.CAUTION IN CARRYING ORTRANSPORTING THE PROJECTOR– Do not drop or bump the projector, otherwisedamages or malfunctions may result.– When carrying the projector, use a suitable carryingcase.– Do not transport the projector by courier or anyother transport service in an unsuitable transportcase. This may cause damage to the projector. Forinformation about transporting the projector bycourier or any other transport service, consult yourdealer.– Do not put the projector in a case before it is cooledenough.20˚20˚Do not pitch the projector morethan 20 degrees backward andforward.Safety Instructions