26Computer Input6Computer System SelectionThis projector automatically tunes to various types of computers based on VGA, SVGA, XGA,SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If Computer isselected as a signal source, this projector automatically detects the signal format and tunes toproject a proper image without any additional setting. (Signal formats provided in this projector isshown on page 6)One of the following messages may appear when:T h e p r o j e c t o r c a n n o t r e c o g n i z e t h ec o n n e c t e d s i g n a l c o n f o r m i n g t o t h eprovided PC Systems. The message "Auto"is displayed on the PC System Menu iconand the Auto PC Adjustment function worksto display proper images. If the image isnot projected properly, a manual adjustmentis required. (p.8, 9)There is no signal input from computer.C h e c k t h e c o n n e c t i o n b e t w e e n y o u rc o m p u t e r a n d t h e p r o j e c t o r. ( S e e"Troubleshooting" on page 57.)AutoThe preset system is manually adjusted inthe PC Adjust Menu. The adjusted data canbe stored in Mode 1 ~ 5. (p.8, 9)PC Systems provided in this projector ischosen. The projector chooses a propersystem provided in the projector anddisplays it.*Mode 1 and SVGA 1 are examples.Mode 1SVGA 1-----Press the MENU button to display the On-ScreenMenu. Press the Point 7 8 buttons to move thered framed pointer to the PC System Menu icon.Press the Point ed buttons to move the red arrowpointer to the system that you want to set, and thenpress the SELECT button.PC system can also be selected manually.Selecting Computer System Manually12The Auto PC Adjustmentfunction operates to adjustthe projector.PC System MenuThe PC System Menu iconSelected system is displayed.Systems on this dialogbox can be selected.PC System MenuCustom Mode (1 ~ 5) set in thePC Adjust Menu. (p.7, 9)