Sanyo PLC-XU75 Owner's Manual

Contents

CSafety Instructions6Openings in the cabinet are provided for ventilationand to ensure reliable operation of the product and toprotect it from overheating, and these openings mustnot be blocked or covered.CAUTIONHot air is exhausted from the exhaust vent. Whenusing or installing the projector, the followingprecautions should be taken.– Do not put any flammable object or spray cannear the projector, hot air is exhausted from theventilation holes.– Keep the exhaust vent at least 3' (1 m) away fromany objects.– Do not touch a peripheral part of the exhaust vent,especially screws and metallic part. This area willbecome hot while the projector is being used.– Do not put anything on the cabinet. Objects puton the cabinet will not only get damaged but alsocause fire hazard by heat.Cooling fans are provided to cool down theprojector. The fans’ running speed is changedaccording to the temperature inside the projector.Air CirculationAir Intake VentAir intake VentExhaust Vent(Hot air exhaust)Air Intake VentDo not tilt the projector more than0 degrees from side to side.Do not point the projector up toproject an image.Do not point the projector downto project an image.Do not put the projector on eitherside to project an image.Install the projector properly. Improper Installationmay reduce the lamp life and cause a fire hazard.Installing the Projectorin Proper Position20˚20˚USE CAUTION IN CARRyING ORTRANSPORTING THE PROjECTOR– Do not drop or bump the projector, otherwisedamages or malfunctions may result.– When carrying the projector, use a suitablecarrying case.– Do not transport the projector by using a courieror transport service in an unsuitable transportcase. This may cause damage to the projector.To transport the projector through a courier ortransport service, consult your dealer for theirinformation.– Do not put the projector in a case before theprojector is cooled enough.Moving the ProjectorWhen moving the projector, replace the lens coverand retract the adjustable feet to prevent damage tothe lens and cabinet. When the projector is not in usefor an extended period, put it into a suitable case toprotect the projector.When handling the projector, do not drop, bump,subject it to strong forces, or put other things on thecabinet.Exhaust Vent(Hot air exhaust)