Sanyo PLC-XU75 Owner's Manual

Contents

40Video InputTo reset the adjusted data, select Reset and pressthe SELECT button. The confirmation box appearsand then select [Yes]. All adjustments returns to theirprevious figures.ResetPress the Point 7 8 buttons to obtain better balance ofcontrast. (From 0 to 15.)GammaPress the Point 7 button to soften the image and thePoint 8 button to sharpen the image. (From 0 to 15.)SharpnessTo store the adjusted data, select Store and press theSELECT button. Select a level from Image 1 to 4 withthe Point ed buttons and press the SELECT button. Aconfirmation box appears and then select [Yes].Stored data can be called up by selecting "Image" inthe Image Level Selection on page 38.StoreExit the Image Adjust Menu.Quit✔ Note:Noise reduction and Progressive cannot beselected when 480p, 575p, 70p, 1035i, or 1080iis selected. (p.37)I n t e r l a c e d v i d e o s i g n a l c a n b e d i s p l a y e d i n aprogressive picture. Select one of the following.Off . . . . disabled.L1 . . . . . Select "L1" for an active picture.L . . . . . Select "L" for a still picture.Film . . . Select "Film" for watching a film. With thisfunction, the projector reproduces picturesfaithful to the original film quality.ProgressiveNoise reductionNoise interference on the screen can be reduced.Select one of the following to get smoother images.Off . . . . disabled.L1 . . . . . lower reductionL . . . . . higher reductionImage Level MenuMove the red framed pointerto an image item to be setand then press the SELECTbutton.Store itemThe confirmation boxappears and then select[Yes].