Sanyo PLC-XU75 Owner's Manual

Contents

27Computer Input7Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal,and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows.Auto PC AdjustmentThe Auto PC adjustment function can be operateddirectly by pressing the AUTO PC button on the remotecontrol unit.Direct Operation Remote ControlAUTO PC buttonPress the MENU button to display the On-ScreenMenu. Press the Point 7 8 buttons to move thered framed pointer to PC Adjust Menu item.Press the Point ed buttons to move the redframed pointer to Auto PC Adj. item and thenpress the SELECT button twice.Auto PC AdjMenu Operation12 Move the red framed pointer tothe Auto PC Adj. item and pressthe SELECT button."Please wait..." message appearswhile Auto PC adjustment is inprocess.PC Adjust MenuPC Adjust Menu iconTo store adjustment parametersAdjustment parameters from Auto PC Adjustment canbe memorized in this projector. Once parameters arememorized, the setting can be done just by selectingMode in the PC System Menu (p.6). See "Store" onpage 9.✔ Note:• Fine sync, Total dots, Horizontal, and Vertical ofsome computers cannot be fully adjusted with thisAuto PC Adjustment function. When the image isnot provided properly with this operation, manualadjustments are required. (p.8, 9)• The Auto PC Adjustment cannot be operated when480i, 575i, 480p, 575p, 70p,1035i, or 1080i isselected in the PC System Menu. (p.6)