Sanyo PLC-XU75 Owner's Manual

Contents

35Video InputChoose Video by pressing the INPUT button on the topcontrol or the VIDEO button on the remote control.Before using these buttons, correct input source shouldbe selected through menu operation as describedbelow.Input Source Selection (Video, S-Video)Direct OperationVideoINPUT button✳ See Note at the bottom of this page.✳Remote ControlTop ControlINPUT buttonVIDEO buttonComputer 1Computer 2Press the MENU button to display the On-ScreenMenu. Press the Point 7 8 buttons to move the redframed pointer to the Input Menu icon.Press the Point ed buttons to move the red arrowpointer to Video and then press the SELECT buttonto display the Source Select Menu.12Move the pointer to the source that you want toselect and then press the SELECT button.3Menu OperationAuto W h e n s e l e c t i n g A u t o , t h e p r o j e c t o rautomatically detects the incoming videosignal, and adjusts itself to optimize itsperformance. The projector selects aconnection in the following order:1. S-Video2. VideoWhen video input signal is connected to theVIDEO jack, select Video.When video input signal is connected to theS-VIDEO jack, select S-Video.VideoS-Video✔ Note:• When the Input Search function is set On1 or On2,the input signal will be searched automatically(p.46)• When Monitor out is selected in the Terminalfunction (p.47), Computer 2 is not displayed.Move the pointer toVideo and press theSELECT button.Move the pointer to thesource that you wantto select and press theSELECT button.Source Select Menu (VIDEO)Input MenuInput Menu iconVideo