Sanyo PLC-XW250 - 2600 Lumens Manual

Also see for PLC-XW200: Owner's manual Owner's manual Specification sheet Specification sheet Specifications

Contents

PLC-XW200/250 Expand Serial Command Functional Specifications23 / 648.6.3 CF_INPUT1 CommandCommand “CF_INPUT1_%1_”[CR]%1“ANALOG” ---------- Select Analog RGB Input“YPBPR” ------------ Select Component“S VIDEO” -------- Select S-Video Input“SCART” ------------- Select SCARTDetails Select Computer 1 input and source specified by %1 at the same time.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.4 CF_INPUT2 CommandCommand “CF_INPUT2_%1_”[CR]%1 “ANALOG” ---------- Select Analog RGB InputDetailsSelect Computer 2 input and source specified by %1 at the same time.This command is available in normal Power ON status.Projector returns “101” by selecting Computer 2 while Monitor out is selected inTerminal menu.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.5 CF_INPUT3 CommandCommand “CF_INPUT3_%1_”[CR]%1 “VIDEO” ----------------- Select Composite video InputDetails Select Videoinput. This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.6 CF_INPUT_%1_%2 CommandCommand “CF_INPUT_%1_%2”[CR]%1“COMPUTER1” ------ Select Computer1 Input“COMPUTER2” ------ Select Computer2 Input“VIDEO” ---------------- Select Analog Input“S-VIDEO” ------------- Select S-video Input%2When %1 is COMPUTER1“ANALOG” ----------Select Analog RGB Input“YPBPR” ------------- Select Component“S-VIDEO” ---------- Select S-Video Input“SCART” ------------- Select SCARTWhen %1 is COMPUTER2“ANALOG” ---------- Select Analog RGB InputWhen %1 is VIDEO“VIDEO” ------------ Select Video InputDetailsSelect Input specified by %1 and also Source specified by %2 at onceThis command is available in normal Power ON status.Projector returns “101” by selecting Computer 2 while Monitor out is selected inTerminal menu.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]