Sanyo PLC-XW250 - 2600 Lumens Manual

Also see for PLC-XW200: Owner's manual Owner's manual Specification sheet Specification sheet Specifications

Contents

PLC-XW200/250 Expand Serial Command Functional Specifications57 / 649.11.10 CR_TERMINAL CommandCommand “CR_TERMINAL” [CR]Details Get setting status of TerminalResponseAcceptable “000_%a”[CR]%a “COMPUTER”-------------Computer Input mode“MONITOR”----------------Monitor Out modeUnacceptable “?”[CR]9.11.11 CR_STANDBYMODE CommandCommand “CR_STANDBYMODE” [CR]Details Get Standby Mode setting statusResponseAcceptable “000_%a”[CR]%a “ECO” -------------- Eco Mode“NORMAL” -------- Normal ModeUnacceptable “?”[CR]9.11.12 CR_P-MANE CommandCommand “CR_P-MANE”[CR]Details Get Power management setting statusResponseAcceptable “000_%a”[CR]%a“OFF” -------------------------- Power Management is OFF“READY” ---------------------- Power Management is Ready“SHUTDOWN” ---- Power Management is set to Shut Down modeUnacceptable “Error Code” [CR]9.11.13 CR_P-MANETIME CommandCommand “CR_P-MANETIME”[CR]Details Get time to start Power ManagementResponseAcceptable “000_%a”[CR]%a “001”~”030” -----------------------1 minute to 30 minutesUnacceptable “Error Code” [CR]9.11.14 CR_ON-STA CommandCommand “CR_ON-STA”[CR]Details Get Power ON Start setting statusResponseAcceptable “000_%a”[CR]%a “ON” -------------------------- Power ON Start is ON“OFF” ------------------------ Power ON Start is OFFUnacceptable “Error Code” [CR]