Sanyo PLC-XW250 - 2600 Lumens Manual

Also see for PLC-XW200: Owner's manual Owner's manual Specification sheet Specification sheet Specifications

Contents

PLC-XW200/250 Expand Serial Command Functional Specifications24 / 648.6.7 CF_SYSTEM CommandCommand “CF_SYSTEM_%1”[CR]%1Input isComputer“VGA1” ------------- Select VGA1:“XGA1” ------------- Select XGA1:“WXGA3” ------------ Select WXGA3“1080I” --------------- Select 1080I“1035I” --------------- Select 1035I“720P” ---------------- Select 720P”575P” ---------------- Select 575P”480P” ---------------- Select 480P”575I” ----------------- Select 575I”480I” ----------------- Select 480I“MODE1”~ “MODE5”------------- Select Mode 1~Mode 5Input isVideo“AUTO” -------------------------- Select System “Auto”“NTSC” -------------------------- Select NTSC“NTSC443” --------------------- Select NTSC4.43“PAL” ----------------------------- Select PAL“SECAM” ----------------------- Select SECAM“PAL-M” ------------------------- Select PAL-M“PAL-N” ------------------------- Select PAL-N“1080I” -------------------------- Select 1080i“1035I” -------------------------- Select 1035i“720P” --------------------------- Select 720p“575P” --------------------------- Select 575p“480P” --------------------------- Select 480p“575I” ---------------------------- Select 575i“480I” ---------------------------- Select 480iDetailsSelect System of currently selected InputWhen Input specified by %1 is inappropriate for selected Input, the projectorreturns “101”[CR] and the command is not executedThis command is available in normal Power ON status.Note1) “NTSC” / ”NTSC4.43” / ”PAL” / ”SECAM” / ”PAL-M” / ”PAL-N” is availableonly when Input is VIDEO / S-VIDEONote2) “1080I” / ”1035I” / ”720P” / ”575P” / ”480P” / “575I” / “480I” is available onlywhen Input is Y / Pb/Cb / Pr/CrNote3) D-XGA1/…/D-480P is available only when Input is applicable.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]