101 EnglishSETUP MODEPictBridgeConfirm the transfer-mode option insection 3 of the setup menu is set toPictBridge. Connect the camera to aPictBridge compatible printer using thecamera’s USB cable. The larger plug onthe cable is connected to the printer. Openthe AV out/USB port cover and insert thesmaller plug of the cable into the camera.Turn the camera on; the PictBridge screenis displayed automatically.Individual still images can be selected forprinting on the PictBridge screen. Forother printing options, see the menunavigation section on page 103.The display button switches between thesingle frame and index playback formats.Enlarged playback, activated with thezoom switch, can be used to examineimage files on the screen.Use the left/right keys of the controller todisplay the image to be printed.Press the up key to select the number ofcopies to be printed. To deselect an imagefor printing, press the down key until thenumber of copies eaches zero.Repeat the previous steps until all theimages to be printed are selected. Pressthe center button of the controller tocontinue.Reset defaultDate/Time setVideo outTransfer modePictBridgeData storage:move :sel. :printTotal number of printsNumber of copies
