26 Safety and Servicing Information TB8100 Service Manual© Tait Electronics Limited September 2006Component CuttingMethod 1. Cut the leads on the component side of the PCB.1. Heat the solder joint sufficiently to allow easy removal of the leadby drawing it out from the component side: do not use undue force.2. Fill the hole with solder and then clear with solderwick.1.7.3 Cased Mica CapacitorsCased mica capacitors can be removed by heating the top with a heavy-dutysoldering iron and gently lifting the capacitor off the PCB with asolder-resistant spike or equivalent. Make sure that the solder at the tabsolder joint is melted or removed before attempting to lift the capacitor.
