Jun 04 Publication No. GEG-99199TallyGenicom Intelliprint mL260 User Guide 3About this ManualChapter 7: Using the 550-Sheet FeederThis chapter provides all of the information necessary to install, use, and maintain the 550-sheetpaper feeder option, including procedures for cleaning the feeder and removing paper jams.Chapter 8: Using the Envelope FeederThis chapter provides all of the information necessary to install, use, and maintain the envelopefeeder, including procedures for removing paper jams.Chapter 9: Using the Offset Catch TrayThis chapter provides all of the information necessary to install, use, and maintain the offset outputtray, including procedures for cleaning and removing paper jams.Chapter 10: New Extended FeaturesThis chapter describes the procedures for installation of DRAM Memory DIMMs and FLASHDIMMS. Also describes how to use the extended features associated with these options.Appendix A: Customer Support and Part NumbersThis appendix directs you to sources of help and information, and also lists the part numbers for26 ppm printers, options, and consumables.Appendix B: Safety Notes and Regulatory CompliancesThis appendix describes cautions to take when installing, transporting, or operating the printer, andalso includes the applicable regulatory compliances.Printer OrientationThroughout this guide, the four sides of the printer are referred to as front, rear, right, and left. Thefront of the printer is the side near the control panel, and the rear of the printer is opposite thefront. The left and right sides of the printer are defined as the sides to the left and right, respectively,of a person who is facing the front of the printer.ConventionsThis following conventions are used throughout this manual to emphasize certain procedures orinformation:NOTE: A note is a tip or extra information that may be helpful in installing or using the printer.CAUTION: A caution message provides information that may help you avoid equipmentdamage, process failure, or inconvenience. Read all caution messages carefully.WARNING! A warning message indicates the possibility of personal injury if a specific proce-dure is not performed exactly as described in the guide. Pay close attention to these sec-tions and read them fully to prevent possible injury.
