Jun 04 Publication No. GEG-99199TallyGenicom Intelliprint mL260 User Guide 8-7Solving Envelope Feeder Problems3. Lower the paper holder.4. Adjust the paper guide to the size of the envelopes or postcards you are using.Solving Envelope Feeder ProblemsWhen there is a problem with the envelope feeder, the printer control panel displays an error codeand error message. Most envelope feeder error codes indicate routine status conditions such as run-ning out of paper or a paper jam. Some error codes indicate much more serious problems that mayrequire the help of a service technician.■ If the printer control panel displays an error message or an error code, refer to “InterpretingEnvelope Feeder Error Messages” on page 8-10.■ If you have an envelope feeder problem but the printer control panel does not display an errormessage or error code, refer to “Correcting Miscellaneous Envelope Feeder Problems” onpage 8-10 and follow the directions for correcting that problem.Envelopes Become Creased when PrintingIf envelopes are creased or wrinkled after printing, lift up the fuser release levers at the left and rightside of the fuser unit, and try printing again. The printed image may appear thin using thismethod, but the envelopes will not be creased or wrinkled.Use the following procedure to lift the fuser release levers:
