Jun 04 Publication No. GEG-99199TallyGenicom Intelliprint mL260 User Guide 9-13Maintaining the Offset Catch TrayMaintaining the Offset Catch TrayThe offset catch tray requires very little maintenance; however, with normal use you will need toperform some routine maintenance tasks such as cleaning.Cleaning the Exterior of the Offset Catch TrayThrough normal use the exterior of the offset catch tray may become dirty or stained with toner.Although exterior dirt should not affect printer performance, an occasional exterior cleaning maybe necessary to maintain the appearance of the offset catch tray.1. Turn the printer off by pressing [ O ] on the power switch on the right side of the printer.2. Remove the plug of the AC power cord from the AC wall outlet.3. Using a soft cloth, slightly damp with cold water, wipe the offset catch tray covers and trayfaces. Use a very mild, non-abrasive soap to remove heavy dirt and toner stains.4. Using a soft, dry cloth, thoroughly dry the covers and tray faces.5. Insert the plug of the AC power cord into the AC wall outlet, and turn the printer on bypressing [ I ] on the power switch on the right side of the printer.Removing the Offset Catch TrayUse the following procedure to remove the offset catch tray:1. Pull the output tray all the way out and lower the paper stop.CAUTION: Do not use solvents or abrasive cleaners to clean offset catch tray covers. Useonly cold water and a very mild soap to clean covers.
