TASCAM DP-006 212 – Quick Start GuidesSetting the guitar as an input source1. Press the INPUT SETTING button to open the INPUT SETTINGscreen.2. In order to use the guitar/line input to record guitar to TRACK 2, use theDATA wheel to set the input source for IN A(INPUT A) to GUITAR/LINE, GUITAR/LINE Mor GUITAR/LINE H.3. Press the HOME button to reopen the Home Screen.NOTEGUITAR/LINE, GUITAR/LINE Mand GUITAR/LINE Hsettingschange the input gain. Set according to the level of the input.If you are not sure which setting to use, choose GUITAR/LINE. If theinput level is still too low after adjusting it, return to INPUT SETTINGscreen and change the setting to GUITAR/LINE M.If the input level is still not high enough, change the setting to GUITAR/LINE H.Recording lead guitar to TRACK 2Now, you will record lead guitar on TRACK 2 while listening to the rhythmguitar on TRACK 3.Follow these steps to change the recording source for TRACK 2.1. When the recorder is stopped, press the ASSIGN button to open theINPUT ASSIGNscreen.
