62 TASCAM DP-0067 – Recorder FunctionsUsing the bounce function1. When the recorder is stopped, press the REC MODE button to open theRECORDER MODEscreen.2. Use the DATA wheel to select (highlight) the BOUNCE item.3. Press the F4 [EXEC] button.After a Bounce! pop-up message appears, the recorder entersBOUNCE mode, and the Home Screen reopens.NOTEWhen the recorder is in BOUNCEmode, BOUNCEappears highlighted atthe upper left of the Home Screen.4. Press the TRACK REC buttons for the bounce destination tracks to lighttheir indicators.For a stereo bounce, press two mono track REC buttons or one stereotrack REC button. (See “Setting the track type (Tracks 3 and 4 only)” onpage 54.)Examples: Press the TRACK 1 and TRACK 2 REC buttons.If the track type of TRACK 3 and TRACK 4 is set to MONO,press the TRACK 3 and TRACK 4 REC buttons.If the track type of TRACK 3 or TRACK 4 is set to STEREO,press either the TRACK 3 or TRACK 4 REC button.For a mono bounce (to a single track), press one mono track REC buttonExamples: Press either the TRACK 1 or TRACK 2 REC button.If the track type of TRACK 3 and TRACK 4 is set to MONO,press either the TRACK 3 or TRACK 4 REC button.NOTEWhen the bounce destination track is mono, IN A(INPUT A) is recordedregardless of the assignment settings.TIPYou can record an additional performance to the bounce destinationtrack(s) while monitoring the mix that is being bounced to them. In otherwords, you can overdub as you bounce.
