TASCAM DP-006 516 – Basic RecordingSelecting the input sourceThis unit has two inputs (INPUT A/B) that can be selected separately as inputsources.The built-in microphones (front panel MIC A/B) and external input signals(input through the rear panel INPUT A/B jacks) can be selected as inputsources.Mic, line and guitar signals can be input through the INPUT A standard jack.Set the MIC/LINE-GUITAR switch on the left side of the unit to GUITAR.1. When the recorder is stopped, press the INPUT SETTING button to openthe INPUT SETTINGscreen.Use the IN Aand IN Bitems to set the input sources for INPUT A andINPUT B.2. Use the F3 [5] and F4 [b] buttons to select (highlight) the IN Aor INB setting value, and use the DATA wheel to set the input source.IN A optionsOption DescriptionOFF Input offINT.MIC A-Low(default value) Built-in mic A (low input gain)INT.MIC A-Mid Built-in mic A (medium input gain)INT.MIC A-High Built-in mic A (high input gain)GUITAR/LINE Guitar or line through INPUT A jack(low input gain)GUITAR/LINE M Guitar or line through INPUT A jack(medium input gain)GUITAR/LINE H Guitar or line through INPUT A jack(high input gain)MIC Mic through INPUT A jackIN B optionsOption DescriptionOFF Input offINT.MIC B-Low(default value) Built-in mic B (low input gain)INT.MIC B-Mid Built-in mic B (medium input gain)INT.MIC B-High Built-in mic B (high input gain)LINE Line through INPUT B jack (low input gain)LINE Mid Line through INPUT B jack (medium inputgain)LINE High Line through INPUT B jack (high input gain)MIC Mic through INPUT B jack3. After making the setting, press the HOME button to return to the HomeScreen.
