TASCAM DP-006 657 – Recorder FunctionsRepeat playbackUse the repeat playback function to play the same part again and again. Therepeated passage is time between the IN and OUT points.Setting IN and OUT pointsIn addition to using them for setting the repeat playback passage, the IN andOUT points are also used for interval setting for track editing. Moreover, theIN and OUT points are used as the start and end points when making stereomaster tracks.You can set these points when recording, playing back and stopped.NOTEIn the following cases, IN and OUT points cannot be captured or edited.i During repeat playbacki When the recording mode is set to MASTER RECor MASTERPLAY8 Capturing IN and OUT points1. Press the IN/OUT button to open the I/O SETTINGscreen.2. Press the F3 [IN] button or F4 [OUT] button at the desired position(whether the unit is stopped, playing or recording) to set the IN/OUTpoint. SET IN!or SET OUT!and the captured time appear in apop-up message.SET IN SET OUTNOTEWhen the Home Screen is open, you can also use the F3 and F4 buttons toset IN and OUT points even though these F3/F4 button assignments do notappear.The set times will be shown with a SET IN!or SET OUT!message asabove.8 Editing IN/OUT points1. When the I/O SETTINGscreen is open, press the F2 [EDIT] button toenable editing.2. Edit the values of IN and OUT points using the following guidelines.• Use the F3 [5] and F4 [b] buttons to move the cursor (underlined)between the IN and OUT items.• Use the m [RTZ] and, [LRP] buttons to move the cursor (underlined)between time fields.• Use the DATA wheel to change the value at the cursor position(underlined).
