TASCAM DP-006 698 – Editing TracksIN/OUTThese show the starting/ending points when it is necessary to define a part ofa recording for editing.However, you cannot change the IN and OUT points when using a trackediting function. Set these points on the I/O SETTINGscreen, which youcan open by pressing the IN/OUT button. (“Setting IN and OUT points” onpage 65.)Example of IN and OUT itemsDESTINATION TRK (copy destination track)Use this to set the track that will be the destination of a copy, insert or cloneedit.If a mono track was set as the SOURCE TRK, the DESTINATION TRKitem options will also be mono tracks.If a stereo track was set as the SOURCE TRK, the DESTINATION TRKitem options will be stereo tracks and 1/2 (track pair).Example of DESTINATION TRKitemCLONE TRACK (track duplication)Using CLONE TRACKyou can create a copy of a single track, a track pair ora master track on a different track (or tracks).This copies the entire track, so the IN and OUT points have no effect.The parameters that can be set are as follows.• SOURCE TRK (1, 2, 3, 4, 1/2, MST)• DESTINATION TRKNOTEIf you choose the same track for both the SOURCE TRKitem and theDESTINATION TRKitem and press the F2 [EXEC] button, a SameTrackpop-up message appears and the operation is cancelled.
