44 TASCAM DP-0064 – PreparationsRight side panel connectionsDC plugAC wall socketTASCAMPS-P520(sold separately)USBComputerMini-B USB plugNOTE• Recorder functions cannot be used when connected to a computer by USB.• This unit can only be connected to a computer by USB when the recordermode is set to MULTI TRACK.Adjusting the contrastYou can adjust the contrast of the display.Follow these steps to adjust the contrast.1. When the recorder is stopped, press the MENU button to open theMENU screen.2. Use the DATA wheel to select (highlight) the PREFERENCE item, andpress the F4 [t] button to open the PREFERENCE screen.3. Use the F3 [5] and F4 [b] buttons to select the Contrast item, anduse the DATA wheel to to adjust the display contrast.The setting values are 1–10 (default value: 5).Lower values make the display lighter while higher values make it darker.The display appears different depending on the angle from which youview it, so adjust it while the unit is in the actual position that you plan touse it in. Adjusting the contrast might make it easier to read.4. After completing the setting, press the HOME button to return to theHome Screen.
