TASCAM DP-006 495 – Song ManagementNOTETo remove a ✔ from the checkbox, press the F4 [✔] button while the songis selected.5. To copy multiple songs, repeat step 4.6. After selecting all the songs to copy (by putting ✔ marks in their check-boxes), press the F2 [NEXT] button.The copy destination partition is shown.In addition, the amount of open space on the selected MTR partition(Free) and the size of the song data (Total) are shown.If the open space (Free) is less than the song data, copying is notpossible. (If you try to execute it, a No Disk Spacepop-up messageappears to warn you that there is not enough free space in the partition.)7. Use the DATA wheel to select the copy destination MTR partition, andpress the F4 [EXEC] button.When copying completes, the SONG menu screen reopens.NOTETo cancel song copying, press the F1 [BACK] button.8. Press the HOME button to open the Home Screen.Erasing songsSongs can be erased. You can also erase multiple songs at once. You mightwant to erase unneeded songs if the SD card starts to run out of open space.1. When the recorder is stopped, press the MENU button to open theMENU screen.2. Use the DATA wheel to select (highlight) the SONG item, and press theF4 [t] button to open the SONG menu screen.3. Use the DATA wheel to select (highlight) the ERASE item, and press theF4 [t] button to open the SONG ERASEscreen.A list of songs on the active partition is shown.4. Use the DATA wheel to select (highlight) the song you want to delete,and press the F4 [✔] button.A check appears in the checkbox.NOTETo remove a ✔ from the checkbox, press the F4 [✔] button while the songis selected.
