28 TASCAM DP-0062 – Quick Start Guides3. Press the F4 [EXEC] button.After a Master Play!pop-up message appears, the unit entersmaster play mode and the Home Screen reopens.NOTE• When in master play mode, MASTER PLAYappears highlighted at thetop left of the Home Screen.• If you have not made a stereo master track, you will not be able to put theunit into MASTER PLAYmode.4. In this state, you can press the Play (7) button to play back the stereomaster track.Transferring the stereo master track to acomputerAfter creating a stereo master track following the procedures in “Creatingstereo master tracks” on page 72, you can transfer it to a computerconnected using the included USB cable. For instructions about how totransfer the stereo master track to a computer, see “12 – Exchanging Data witha Computer” on page 83.Shutting downWhen you are done using the unit, shut it down.1. Press the HOME button to show the Home Screen.2. Press and hold the button until POCKETSTUDIO appears on thedisplay.The power turns OFF automatically after the unit completes its shutdownprocess, including saving various information from your session.Always follow the above procedures to shut down the unit properly.CAUTIONDo not remove the batteries or disconnect the power cord, for example,to turn the power OFF. If you do so, the unit cannot shut down properlyand all recording data and settings that had been made since the lastshutdown or song saving operation will be lost. Lost data and settingscannot be restored.
