TASCAM DP-03SD 132 – Quick Start GuidesPlaying back the recording1 To return to the beginning of the song (ZERO point), pressand hold the STOP (ª) button and press the REW (Ô) (TOZERO) button (TO ZERO function).2 Press the PLAY (Á) button to play back the recording onTRACK 1.3 Use the TRACK 1 fader and the MASTER fader to adjust theplayback monitoring level. Use the PHONES LEVEL knob toadjust the final monitoring volume.TIPUse the TRACK 1 PAN knob to set the stereo position whenmonitoring.Recording a guitar to TRACK 2We will listen to the rhythm guitar on TRACK 1 as we record thelead guitar on TRACK 2.Follow these procedures to change the recording source.1 Press the ASSIGN button to open the INPUT ASSIGNscreen.On this page you can set the recording source for each trackto INPUT A or INPUT B.By default, the recording source for tracks 1, 3, 5 and 7 is setto INPUT A (A), and the recording source for tracks 2, 4, 6and 8 is set to INPUT B (B).2 Press the TRACK 2 REC button to set the SOURCE forTRACK 2 to A.3 Press the HOME button to return to the Home Screen.4 Press the TRACK 2 REC button. The TRACK 2 REC indicatorblinks and the unit enters record standby.When you play guitar, the input level is shown by the levelmeters for “ ” (INPUT A) and “ ” (TRACK 2) on thedisplay.TRACK 2 REC indicator
