8 TASCAM DP-03SD2 – Quick Start GuidesPlayback and mixingIn this section, we will play back the demo song on the includedSD card.When this unit is purchased new, the SD card with the demosong on it is already installed in the unit, but we will start byexplaining how to insert an SD card using the procedures below.Preparations1 Open the SD card slot cover on the left side panel and insertthe included SD card into the slot.CAUTIONBe careful not to forcibly insert the card in the wrongdirection. Doing so could damage the slot or the card.2 After inserting the SD card, close the card slot cover.3 Connect the included AC adaptor (TASCAM PS-1225L) to theDC IN 12V connector on the rear panel.AC outletTASCAMPS-1225LDC plugCAUTIONNever use any adaptor other than the TASCAM PS-1225LAC adaptor (included), because it is designed for the powerrequirements of this unit. Use of a different adaptor couldcause malfunction, fire or electric shock.There is a hook for holding the AC adaptor cord in place(cord holder) on the bottom panel. When using the adaptor,wrap the cord around this hook to prevent it from beingdisconnected during use.4 Connect headphones to the PHONES jack on the rear panel.Headphones5 Press the STANDBY/ON button on the rear panel to turn thepower ON.Startup ScreenAfter the unit starts the Home Screen appears on the display.Home Screen
