Tascam Digital Portastudio DP-03SD Owner's Manual

Contents

Tascam Digital Portastudio DP-03SD Owner's Manual Manual pdf 49 page image

TASCAM DP-03SD 499 – Mixing down and mastering tracks1 Press the REVERB button to open the REVERBSETTING screen.2 Set the reverb using the following parameters.Parameters Setting valuesTYPE Reverb typeHall 1, Hall 2, Room, Studio, Plate1, Plate 2(Default: Hall 1)TIME Reverb time(depth) 0.2 (0.8 for Plate types) – 3.2 SecLEVELReverbamount(volume)0–100Use the F3 (˙) and F4 (¥) buttons to select parameters,and use the DATA wheel to set the parameters.The reverb return signal (signal after the effect is applied) ismixed into the stereo signal.3 After making the reverb setting, press the HOME button toreturn to the Home Screen.4 Use the track REVERB knobs to adjust the amount of tracksignal sent to the reverb effect.NOTEThe default values of each reverb type are as follows.TYPE Default valuesTIME LEVELHall 1 1.8 80Hall 2 2.2 80Room 1.4 10Studio 0.6 20Plate 1 1.4 60Plate 2 1.8 60When a setting value is the same as the default value for thereverb type, INI appears below that setting value.Muting tracks1 Press the MUTE button to open the TRACK MUTE screen.2 Press the REC button of each track to turn mute ON or OFFfor it. When mute is ON, the track number is shown in inverse(dark number on light background).Tracks 2,3,4 and 7 are muted in the example above.3 After muting the desired tracks, press the HOME button toreturn to the Home Screen.NOTEWhen tracks are muted, their track numbers also appear ininverse (dark number on light background) on the HomeScreen as shown below.Tracks 2, 3, 4 and7 are mutedCreating a stereo master trackWhen you are satisfied with your mix, this unit can record themixed down tracks and create a stereo master track internally.