TASCAM DP-03SD 5911 – SD Card ManagementViewing the capacity of the MTRpartitionFollow these procedures to view the capacity of the MTRpartition.1 When the recorder is stopped, press the MENU button toopen the MENU screen.2 Use the DATA wheel to select CARD, and press the F4 (¥)button to open the CARD screen.Use the DATA wheel to select PARTITION, and press theF4 (¥) button to open the PARTITION screen, whereyou can view the capacity of the MTR partition.Initializing SD cardsIf you want to use an SD card that was used with this unit onother equipment, we recommend that you initialize it.When you initialize an SD card, the entire card is formatted asFAT32.1 When the recorder is stopped, press the MENU button toopen the MENU screen.2 Turn the DATA wheel to select CARD, and press the F4 (¥)button to open the CARD menu screen.3 Turn the DATA wheel to select the SD INITIALIZEitem and press the F4 (¥) button.A pop-up message warning that all data on the card will beerased appears.4 Press the F3 (YES) button to initialize the entire card andformat it as FAT32.To cancel initialization, press the F4 (NO) button.CAUTIONAfter initializing an SD card, it is necessary to format it if youwant to use it with the DP-03SD again. (See “Formatting SDcards” on page 27).
