Tascam Digital Portastudio DP-03SD Owner's Manual

Contents

Tascam Digital Portastudio DP-03SD Owner's Manual Manual pdf 65 page image

TASCAM DP-03SD 6512 – Exchanging Data with a ComputerExporting a stereo master trackYou can export a stereo master track that you have made onthe unit (see “Creating a stereo master track” on page 49) to acomputer. When you create a new stereo master track for a song,the existing stereo master track is overwritten, so if you want tokeep multiple different stereo master tracks, you might want tosave them to a computer.Before starting the following export procedures, make surethat the song that you want to export a stereo master track foris currently loaded and that you have already created a stereomaster track for it.1 When the recorder is stopped, press the MENU button toopen the MENU screen.2 Turn the DATA wheel to select IMPORT/EXPORT, andpress the F4 (¥) button to open the IMPORT/EXPORTmenu.3 Turn the DATA wheel to select EXPORT MASTER, andpress the F4 (¥) button.The default file name is displayed and can be edited.NOTEIf there is no stereo master track, an error message appears.4 Use the REW (Ô)/F FWD () buttons, the DATA wheeland the F3 (INS) and F4 (DEL) buttons to edit the nameof the stereo master file being exported (See “Editing names”on page 30).5 After setting the name, press the F2 (EXEC) button.A stereo master track file is exported as a 16-bit, 44.1-kHz,stereo WAV file to the FAT partition. The file name of theexported file is the name set in step 4 above plus the “.WAV”extension.If you have previously exported a stereo master track withthe same name, a confirmation message (Duplicatename - Are you sure?) appears.Press the F3 (YES) button to overwrite the older track.If you don't want to overwrite the older track, press F4 (NO)button.NOTETo cancel exporting, press the F1 (BACK) button.6 Press the HOME button to return to the Home Screen.7 Connect this unit to a computer using a USB cable (see“Connecting with a computer” on page 60).8 Use the computer to copy the stereo master file from theWAVE directory on the FAT partition of the unit to thecomputer.9 After copying finishes, disconnect the unit from thecomputer using the proper procedures and then remove theUSB cable (see “Disconnecting” on page 60).