12 TASCAM MD-CD1MKIII2 – Remote Control UnitPreparation of Remote ControlUnitInserting batteries1 Open the cover on the back of the remote control.2 Insert two AA batteries with the correct ±orientations.3 Close the cover.NOTEThe batteries are not supplied for Taiwan.When to replace the batteriesReplace both batteries with new ones when the rangeof the remote control becomes short or if the buttonsbecome unresponsive.Precautions about using batteriesMisuse of batteries could cause them to leak, rupture orotherwise be damaged. Please read and abide by theprecautions on the battery labels when using them. Seepage 5 of this manual for additional precautions.Precautions about using the remotecontrolWhen using other devices controlled by infrared rays,•use of this remote control might operate these devicesby mistake.Use the remote control within the following range.•Remote sensor15˚ 15˚Operation distanceDirectly in front: Within 7 meters15˚ left or right: Within 7 meters
