Tascam MD-CD1mkII Owner's Manual

Contents

44 TASCAM MD-CD1MKIIITitles can be given to the MD disc, and the tracks andgroups on it, using the TITLE sub-menu on the MD menu.NOTEAs with the Editing menu, after the name is set, if thepower is turned off while the MD is still inserted (TOClights up), the revised U-TOC will not be recorded on thedisc, and the title will not be input.Disc title input (TITLE)1 In the stop mode, select the TITLE INPUT?option on the TITLE sub-menu on the MD menu.Title> Disc will be displayed.2 While Title> Disc is displayed, press the MULTIJOG dial (or the YES button) on the front panel, orthe ENT/YES button on the remote control.The current disc title is shown on the character display,title edit mode is entered, and the cursor flashes.NOTEIf there is no current title, nothing will be shown on the•display, and only the cursor will flash.If a group is set, the default title automatically created•by the MD-CD1MKIII will be displayed. Refer to “Creatinga group” on page 42.3 Add a title following the guidelines below, andpress the MD MENU button or the MENU button onthe remote control to confirm.NOTEFor discs with groups, set the Group playback mode to onbefore inputting a title. If a title is added with the Groupplayback mode off, the group settings may becomeinoperative.Title input operationIn Title Input mode, the cursor flashes in the characterdisplay. Since it is more efficient to use the remote controlto input titles, the following explanation will center on itsuse.NOTEIt is even more efficient to connect a keyboard for titleinput. Refer to “Title input by keyboard” on page 46.Follow the guidelines below to input titles on the screen.Select the type of character for inputPress the CHARA button on the remote control to selectfrom three different types of characters.Lower case letters/code: no indicationCapital letters/code: CAPSJapanese:For front panel operation, use the DISPLAY button.Input procedureUse the number buttons to input characters at the cursorposition.Press the number buttons the necessary number of timesto get the desired character to appear on the display.To insert a space in entered text, press the INS key.Example: In lower case letters/code mode, the letterchanges in the following order each time the 2 key ispressed:a œ b œ c œ 2 œ aFront panel operation: Press the YES key to insert a space.Use the MULTI JOG dial to select a character.To move the cursor positionUse the skip buttons.However, if a different number button is pushed, thecursor automatically moves to the right.For front panel operation, use the skip buttons.To delete charactersSet the cursor on the character to be deleted, then pressthe DEL/CLR button on the remote control.For front panel operation, use the NO button.To change a characterDelete a character following the above procedure theninput a new character, or move the cursor to a characterthen use the MENU–/+ key on the remote control or theMULTI JOG dial on the unit to select the character.NOTEAs with the Editing menu, after the name is set, if thepower is turned off while the MD is still inserted (TOClights up), the revised U-TOC will not be recorded on thedisc, and the title will not be input. The U-TOC is recordedwhen the disc is ejected.Track title inputMethod 1ªWith this method, the tracks for title input are selectedfirst.1 Put the deck in playback or playback standbymode on the track you wish to add a title. Duringrecording, you may also input a title for the currenttrack being recorded.2 Select the TITLE INPUT? option on the TITLEsub-menu of the MD menu, and press the MULTIJOG dial (or the YES button) on the front panel, orthe ENT/YES button on the remote control.The title of the track in play will be shown on thecharacter display, Title Edit mode is entered, and thecursor flashes.11 – Title input