Tascam MD-CD1mkII Owner's Manual

Contents

52 TASCAM MD-CD1MKIII16 – Messages and TroubleshootingOperation messagesªMessage Details/responseBlank Disc A blank recordable MD disc has beeninserted.Complete Editing operation has been successfullycompleted.DubbingWaitThe unit is being readied for dubbing.TOC Reading The table of contents data is beingread.UTOCWritingThe user table of contents data isbeing written to the disc.Now Editing Editing operation is being performed.Over Write Overwrite recording mode is on.Warning messagesªMessage Details/responseKey Locked The entire panel is locked. To releasethe lock, press and hold the TIME andDISPLAY buttons simultaneously.CD Locked The deck is locked. To release the lock,select none under PANEL LOCK?in the SYSTEM submenu of the CDmenu.MD LockedEjectLockedError MessagesªMessage Details/responseDisc Error! The disc has malfunctioned. Pleasereplace with a new disc.Disc Full! No recording time remaining on thedisc, so new recording is not possible.Title Full! No more titles can be recorded.D-IN UNLOCK! Digital signals are not correctly input.This message appears if the selectedinput source (coaxial or optical) doesnot correspond to the connectedterminal or the connected device ispowered off. Select the input sourcecorrectly, or turn on the connecteddevice.NotExecute!Editing cannot be completed due toMD system limitations.Not Audio! There is no audio signal from DIGITALINPUT.No Track! There are no recorded tracks.PGM Empty! There is no programPGM Full! No new programs can be created.W_Protected!Write-protected MD disc, so recordingor editing is not possible.Pre Master! A playback-only MD disc has beeninserted.TOC Error! TOC data is not correct.Can't Edit! Editing cannot be performed dueto MD system limitations or editingcondition limits.Can't Rec! Recording cannot start because theGroup playback mode is on.Can't Sel! Menu selection cannot be performeddue to selection prohibitions.Can't Undo! You can’t undo since no editing hasbeen done.Rec Error! There was an error during recording.Please re-record.Drive Error! There is a problem in the drive.Sync RecON!The Sync mode is on, so the recordingcannot be started manually.Err Group! There is a problem in the data of thecreated group.No Group! No groups have been created.No DIR! The directory where the file is has notbeen registered.Decode Err! The MP3 file cannot be played back.IR Disable! All remote control operations aredisabled.Format Err! The unit does not support the formatof the MP3 files on the disc.TroubleshootingªThere is no power to the unit.Please check that the power cord is properly plugged in.Disc Error! is displayed.The disc may be dirty. Please replace the disc.Playback is not possible.This may be due to condensation. In this case, removethe disc, turn the power on and wait a few hours, then tryagain.No sound is output.Confirm the connections with the audio system.•Check the volume level, and proper amplifier operation.•Recording isn’t possible.The MD disc is set to write protect. Slide the tab on the•cartridge to the closed position and try again.Confirm the connections with the audio system.•Adjust the recording level.•The disc may be for playback only. Please replace it•with a recordable MD disc.Remaining recording time on the MD is insufficient.•Please delete unwanted tracks or replace the MD disc.Confirm amplifier operation.•Noise or static can be heard.Please re-position the unit away from strong sources ofmagnetism such as a television.The MD-CD1MKIII does not retain settings.While settings are retained each time they are made, insome cases they will not be retained when the power isturned off too soon. To prevent this from happening, donot turn off the power right after making a setting.