Tascam MD-CD1mkII Owner's Manual

Contents

TASCAM MD-CD1MKIII 31Deleting a programmed track1 During STOP mode, use the skip button to selectthe track for deletion.The track number will be shown in the display.2 Press the DEL/CLR button.NOTERight after STOP, if the DEL/CLR button is pressed, thelast track programmed will be deleted.Adding a track to the program1 During STOP mode, using the skip buttons, skipto the programmed track before the position youwish to add a track.The track number should be shown on the display.Example:To add a new 3rd track (between 2nd and 3rd), displaythe 3rd track (“3p”) of the program.2 Use the number buttons to input the track numberof the track to be added.3 Press the ENT/YES button on the remote control.NOTERight after STOP, if the number of the track to be•added is input, and the ENT/YES button on the remotecontrol is pressed, the track will be added to the end ofthe program.To add a track to the program by front panel operation,•use the MULTI JOG dial to select the track number,then press the dial.Erase a CD or MD programInsert the CD or MD for which you want to erase aprogram into the deck.1 Set the playback mode to Program.2 Select “CLEAR PROG?” from the CD or MD menu.Sure? appears.If the playback mode is not Program, Can't Sel!appears and you cannot select the option.3 Press the MULTI JOG dial (or YES key) on the unit orthe ENT/YES key on the remote control.The program is erased. When the erasing is complete,Complete appears.NOTEThe program is also erased if all tracks in the program areerased using the DEL/CLR button.Program limitationsWith an MD, if the Group playback mode is on,•programs that include more than one group cannot becreated.With data CDs, if the Directory playback mode is on,•programs that include more than one directory cannotbe created.The same track may be repeated in a program.•When 99 CD tracks (or 25 MD tracks) are entered into a•program, if you attempt to add a track, PGM Full!will be displayed, and no more tracks can be added.Saving program dataPrograms of up to 100 discs including CD and MD can•be retained.For data CD, a single program uses double the usual•capacity, so the maximum number retainable will belower.If a created program exceeds the capacity, other•programs will be automatically erased starting fromthe oldest.Programs on the currently inserted disc can be erased•using the menu.CDs are distinguished by the total number of tracks (or•files) and total recording time (total capacity in the caseof data CD).MDs are distinguished by the total number of tracks•and recorded time.Discs with the same total number of tracks and the•same total recording time (total capacity in the case ofdata CD) are regarded as identical.Random playbackIn this mode, the deck will play back all the tracks onthe disc in completely random order, regardless of tracknumber.1 During stop mode, press the P. MODE button onthe remote control until RANDOM is indicated onthe display.NOTEYou can also use the PLAY MODE? option in the PLAYsub-menu of the MD and CD menus to set the RandomPlayback mode.2 Press the PLAY button.Random playback starts. Playback stops when all thetracks have been played once.NOTEEven when the power is turned off, the deck will remain inRANDOM mode.7 – CD and MD Playback