TASCAM MD-CD1MKIII 236 – Menu OperationThe various settings and editing operations possible with the MD-CD1MKIII are performed through menu options shownon the display. Among the many menu setting options, some may be made directly using the buttons on the remotecontrol.Menu configurationThere are menus for both CD and MD operation. Below each menu are sub-menus, and in each submenu there are menuoptions. The menus are configured as shown below.CD MenuMenu option Function Manual reference PageCD PLAY sub-menu (options for CD playback)PLAY MODE Playback mode settings “Playback modes” 26REPEAT Repeat mode settings “Repeat playback” 29A_CUE LEVEL Auto Cue level setting “Auto cue” 28A_CUE Auto Cue on/off “Auto cue” 28A_READY Auto Ready on/off “Auto ready (of a specified track)” 28PITCH STEP Pitch control variable pitch setting “Pitch control” 30EOM TRK Track EOM mode and operation time “End of disc/track warning” 32EOM DISC Disc EOM mode and operation time “End of disc/track warning” 32TIMER PLAY Timer play on/off “Timer playback” 29KEY LEVEL Key control level setting “Changing the key of playback” 32DIR MODE Data CD directory playback mode on/off “MP3 and WAV file directoryplayback”33MP3 ACTION Setting the error handling during MP3 file playback “Setting MP3 ACTION” 33CD VOL FUNC sub-menu (CD volume function options)PLAY VOLUME Output level setting “Output volume” 33FADE IN Fade-in operation time setting “Fade-in and fade-out” 32FADE OUT Fade-out operation time setting “Fade-in and fade-out” 32FADE MODE Setting operation mode after fade-out end “Fade-in and fade-out” 32SERIAL sub-menu (RS-232C data communication options)BAUD RATE data transmission speed setting “Data settings/service data” 49LENGTH data word length setting “Data settings/service data” 49PARITY data parity bit setting “Data settings/service data” 49STOP BIT data stop bit setting “Data settings/service data” 49SYSTEM sub-menu (options for the unit)KEYBOARD setting for keyboard type “Keyboard type setting” 46COMMON CD/MD priority for COMMON output “Basic playback operation” 26CD P_TIME Confirming total CD playing time “Data settings/service data” 49MD P_TIME Confirming total MD playing time “Data settings/service data” 49MD R_TIME Confirming total MD recording time “Data settings/service data” 49IR REMOTE Disabling/Enabling remote control (RC-MC1) operation “Operation basics” 25PANEL LOCK Disabling/Enabling panel operation "Locking the panel operations" 48F_PRESET Resetting all data to initial default settings “Viewing service data” 49CLEAR PROG Deleting a program Erase a CD or MD program 31