Tascam MD-CD1mkII Owner's Manual

Contents

18 TASCAM MD-CD1MKIIIP πThis lights when the display master deck is in recordingstandby or playback standby mode.A DISC, GROUP, TRACK displayDISC lights up when the display master deck has adisc loaded and is stopped.GROUP lights up when the display master is the CDdeck and the Directory playback mode is on, or whenthe display master is the MD deck and the groupplayback mode is on.TRACK is indicated during playback or playbackstandby.S Character displayDisc information, track information, menu, messageand operation status are displayed.DThis lights when the Timer Play function is on.It flashes if a disc is not loaded when the Timer Playfunction is on.F CAPS,These light during title input to indicate either CAPS orJapanese character mode. In lower case letter mode,there is no indication.G EOMThis lights when the remaining track/disc time is lessthan the EOM set value.Rear PanelK L Z:H JXH DIGITAL INPUT MD (coaxial) TerminalThis is the digital input terminal (coaxial) for the MDdeck.J DIGITAL OUTPUTS – MD – CD (coaxial) TerminalsThese are the digital output terminals (coaxial). Theplayback signals from the MD deck and the CD deckare output through their respective digital outputterminals.K ANALOG INPUT MD (UNBALANCED) TerminalsThe analog line input terminals for the MD deck are forRCA pin jacks. Rated input level is –10 dBV.L ANALOG OUTPUTS – MD – COMMON – CD(UNBALANCED) TerminalsThe analog line output terminals are for RCA pin jacks.Rated output level is –10 dBV.MD: Outputs the MD deck signal. During playback, theplayback signal is output; during input monitoring, thesource signal is output.COMMON: Outputs CD and MD signals. Duringplayback of both decks, the output signal depends onthe COMMON? option setting on the SYSTEM menu.CD: Outputs the CD deck signal.: DIGITAL INPUT MD (optical) TermainalThis is the digital (optical) input terminal for the MDdeck.Z DIGITAL OUTPUTS – MD – CD (optical) TerminalsThese are the digital output terminals (optical). Theplayback signals from the MD deck and the CD deckare output through their respective digital outputterminals.X CONTROL I/O (RS-232C) ConnectorRS-232C compatible serial control from an externalcomputer can be performed.4 – Names and Functions of Parts