Table 60: The output signals through RO1Selectionnumber Selection name Description22 FB Control WordB 1523 PID in Sleep mode24 Reserved25 PID1 supervision limits The feedback value of the PID1 controller is not in the super-vision limits.26 PID2 supervision limits The feedback value of the PID2 controller is not in the super-vision limits.27 Motor 1 control The contactor control for the Multi-pump function.28 Motor 2 control The contactor control for the Multi-pump function.29 Motor 3 control The contactor control for the Multi-pump function.30 Motor 4 control The contactor control for the Multi-pump function.31 Motor 5 control The contactor control for the Multi-pump function.32 Reserved (Always open)33 Reserved (Always open)34 Maintenance warning35 Maintenance fault36 Thermistor Fault A thermistor fault occurred.37 Motor Switch The Motor Switch function has detected that the switchbetween the drive and the motor is open.38 PreHeat39 kWh Pulse Output40 Run Indication41 Selected Param.Set9.6 PROHIBIT FREQUENCIESIn some processes it can be necessary to avoid some frequencies because they makeproblems of mechanical resonance. With the Prohibit frequencies function, it is possible toprevent the usage of these frequencies. When the input frequency reference increases, theinternal frequency reference stays at the low limit, until the input frequency reference isabove the high limit.VACON · 144 PARAMETER DESCRIPTIONS9 TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205
