Lighting 135It switches to low beam when:■ a sensor detects the lights ofoncoming or preceding vehicles■ the vehicle speed is slower than12 mph■ it is foggy or snowy■ driving in urban areasIf there are no restrictions detected,the system switches back to highbeam.ActivationThe high beam assist is activated bypushing the indicator lever twice witha speed above 25 mph.The green control indicator lilluminates continuously when theassist is activated, the blue one 7illuminates when high beam is on.Control indicator l 3 113.DeactivationPush indicator lever once. It is alsodeactivated when front fog lights areswitched on.If a headlight flash is activated whenthe high beam is on, the high beamassist will be deactivated.If a headlight flash is activated whenthe high beam is off, the high beamassist will stay activated.The latest setting of the high beamassist will remain after the ignition isswitched on again.Headlight flashTo activate the headlight flash, pulllever.Headlight rangeadjustmentManual headlight rangeadjustmentTo adapt headlight range to thevehicle load to prevent dazzling: turnthumb wheel ? to required position.0 = front seats occupied1 = all seats occupied2 = all seats occupied and loadcompartment laden3 = driver's seat occupied and loadcompartment laden.