Technical Data • 9Technical Condition of the DevicesWAGO-I/O-SYSTEM 750ETHERNET TCP/IP2.2 Technical DataMechanicMaterial Polycarbonate, Polyamide 6.6Dimensions W x H* x L* from upper edge of DIN 35 rail- Coupler/Controller (Standard)- Coupler/Controller (ECO)- Coupler/Controller (FireWire)- I/O module, single- I/O module, double- I/O module, fourfold- 51 mm x 65 mm x 100 mm- 50 mm x 65 mm x 100 mm- 62 mm x 65 mm x 100 mm- 12 mm x 64 mm x 100 mm- 24 mm x 64 mm x 100 mm- 48 mm x 64 mm x 100 mmInstallation on DIN 35 with interlockmodular by double featherkey-dovetailMounting position any positionMarking marking label type 247 and 248paper marking label 8 x 47 mmConnectionConnection type CAGE CLAMP®Wire range 0.08 mm² ... 2.5 mm², AWG 28-14Stripped length 8 – 9 mm,9 – 10 mm for components with pluggable wiring(753-xxx)ContactsPower jumpers contacts blade/spring contactself-cleaningCurrent via power contactsmax 10 AVoltage drop at I max < 1 V/64 modulesData contacts slide contact, hard gold plated1.5 μm, self-cleaningClimatic environmental conditionsOperating temperature 0 °C ... 55 °C,-20 °C … +60 °C for components with extendedtemperature range (750-xxx/025-xxx)Storage temperature -20 °C ... +85 °CRelative humidity 5 % to 95 % without condensationResistance to harmful substances acc. to IEC 60068-2-42 and IEC 60068-2-43Maximum pollutant concentration atrelative humidity < 75%SO 2 ≤ 25 ppmH 2S ≤ 10 ppmSpecial conditions Ensure that additional measures for components aretaken, which are used in an environment involving:– dust, caustic vapors or gasses– ionization radiation.
