Mechanical Setup • 23Power ContactsWAGO-I/O-SYSTEM 750ETHERNET TCP/IP2.6.8 Power ContactsSelf-cleaning power contacts , are situated on the side of the componentswhich further conduct the supply voltage for the field side. These contactscome as touchproof spring contacts on the right side of the coupler/controllerand the bus module. As fitting counterparts the module has male contacts onthe left side.DangerThe power contacts are sharp-edged. Handle the module carefully to preventinjury.AttentionPlease take into consideration that some bus modules have no or only a fewpower jumper contacts. The design of some modules does not allow them tobe physically assembled in rows, as the grooves for the male contacts areclosed at the top.Fig. 2-8: Example for the arrangement of power contacts g0xxx05eRecommendationWith the WAGO ProServe® Software smartDESIGNER, the assembly of afieldbus node can be configured. The configuration can be tested via theintegrated accuracy check.
