16 • The WAGO-I/O-SYSTEM 750Component UpdateWAGO-I/O-SYSTEM 750ETHERNET TCP/IP2.4 Component UpdateFor the case of an Update of one component, the lateral marking on eachcomponent contains a prepared matrix.This matrix makes columns available for altogether three updates to the entryof the current update data, like production order number (NO; starting fromcalendar week 13/2004), update date (DS), software version (SW), hardwareversion (HW) and the firmware loader version (FWL, if available).Update MatrixCurrent Version data for: 1. Update 2. Update 3. UpdateProduction OrderNumberNO Å Only starting fromcalendar week 13/2004Datestamp DSSoftware index SWHardware index HWFirmware loader index FWL Å Only for coupler/controllerIf the update of a component took place, the current version data are registeredinto the columns of the matrix.Additionally with the update of a fieldbus coupler or controller also the coverof the configuration and programming interface of the coupler or controller isprinted on with the current manufacturing and production order number.The original manufacturing data on the housing of the component remainthereby.2.5 Storage, Assembly and TransportWherever possible, the components are to be stored in their originalpackaging. Likewise, the original packaging provides optimal protectionduring transport.When assembling or repacking the components, the contacts must not besoiled or damaged. The components must be stored and transported inappropriate containers/packaging. Thereby, the ESD information is to beregarded.Statically shielded transport bags with metal coatings are to be used for thetransport of open components for which soiling with amine, amide andsilicone has been ruled out, e.g. 3M 1900E.
