WAGO-I/O-SYSTEM 750 Device Description 47750-666/000-003 4FDI/2FDO 24V/10A PROFIsafe V2 iParManualVersion 1.2.0, valid from HW/SW Version 01/014.8.1 Transport and Storage ConditionsDuring transport and storage, the PROFIsafe I/O modules must be protectedagainst undue stress such as mechanical loads, temperature, humidity andaggressive atmospheres.The PROFIsafe I/O modules should be stored in the original packaging whenpossible, which offers optimal protection during transport.When picking or unpacking, do not contaminate or damage the contacts. ThePROFIsafe I/O modules must be stored and transported in suitablecontainers/packaging in compliance with the ESD instructions. The devicescontain components sensitive to static discharge and can be damaged by improperhandling.Therefore, when transporting open modules, use statically shielded transport bagswith metal coating to prevent contamination from amines, amides and siliconessuch as 3M 1900E.In addition, take the required protective measures against electrostatic discharge(ESD) during startup and maintenance of the PROFIsafe I/O modules.Ensure that the environment is well grounded!The modules are equipped with electronic components that may be destroyed byelectrostatic discharge. When handling the modules, ensure that the environment(persons, workplace and packing) is well grounded. Avoid touching conductivecomponents, e.g. data contacts.