96 Commissioning WAGO-I/O-SYSTEM 750750-666/000-003 4FDI/2FDO 24V/10A PROFIsafe V2 iParManualVersion 1.2.0, valid from HW/SW Version 01/01The Safety Editor provides additional services. Click the [Services] button on theSystem Editor toolbar. A selection menu appears with the Compare andPassword menu items.Comparison of parameter data!With this function, only parameter data of the same I/O module type andiParameter set format can be compared.To compare two iParameter sets with each other, select the Compare menu item.The Comparison of iParameter sets dialog opens.To load a parameter file saved on the PC for comparison, click the [Open] buttonand select whether the data set should appear in the Reference or Comparisoncolumn.To load the iParameter data from the I/O module currently connected forcomparison, click the [Read] button and select whether the data set should appearin the Reference or Comparison column.To return the comparison dialog to its original state, click the [Delete] button.To print the results of the comparison between to data sets, click the [Print]button.To exit the Safety Editor comparison dialog, click the [Close] button.Changing the password!Use this function to reset the current password of an I/O module.To change the password, select the Password menu item.If you have not assigned a password for the selected I/O module, then do so in theChange PROFIsafe I/O module password dialog.If you have already assigned a password, then you have to enter the currentpassword and the new password.If you do not know the current password, then you can use the master password toassign a new one. The master password is 16 characters long and is)[4~>#%qM}x=,:$~.To close the Safety Editor, click on [Exit] in the Safety Editor toolbar.7.4.2 OFFLINE ModeWhen opening the Safety Editor, select whether you want to change a parameterfile already stored on the PC or whether you want to create a new parameter file.
