Safety Information RD 12A14 wc_si000516gb.fm1.4 Service SafetyA poorly maintained machine can become a safety hazard! In orderfor the machine to operate safely and properly over a long period oftime, periodic maintenance and occasional repairs are necessary.Personal Protective Equipment (PPE)Wear the following Personal Protective Equipment (PPE) while servicingor maintaining this machine:• Close-fitting work clothes that do not hinder movement• Safety glasses with side shields• Hearing protection• Safety-toed footwearIn addition, before servicing or maintaining the machine:• Tie back long hair.• Remove all jewelry (including rings).1.4.1 Some service procedures require that the machine’s battery bedisconnected. To reduce the risk of personal injury, read and understandthe service procedures before performing any service to the machine.1.4.2 All adjustments and repairs MUST be completed before operation. Do notoperate the machine with a known problem or deficiency! All repairs andadjustments should be completed by a qualified technician.1.4.3 Do not attempt to clean or service the machine while it is running. Rotatingparts can cause severe injury.1.4.4 Do not crank a flooded engine with the spark plug removed on gasoline-powered engines. Fuel trapped in the cylinder will squirt out the spark plugopening.1.4.5 Do not test for spark on gasoline-powered engines if the engine is floodedor the smell of gasoline is present. A stray spark could ignite the fumes.1.4.6 Do not use gasoline or other types of fuels or flammable solvents to cleanparts, especially in enclosed areas. Fumes from fuels and solvents canbecome explosive.1.4.7 Do not modify the machine without the express written approval of themanufacturer.1.4.8 DO NOT stand under the machine while it is being hoisted or moved.1.4.9 DO NOT get onto the machine while it is being hoisted or moved.1.4.10 DO NOT use the machine as a ladder. Use safe ladders and platformsdesigned for this purpose.1.4.11 DO NOT modify, weld, or drill safety frames (ROPS) fitted as originalequipment. DO NOT loosen or remove bolts. DO NOT weld, drill or modifya broken safety frame.WARNING