Technical Data RD 12A78 wc_td000411gb.fm8.6 Vibration MeasurementsThe operator of this machine should expect to be exposed to vibrationlevels listed below when using the machine in performance of itsnormally intended function:• Maximum hand/arm vibration levels are:1.4 m/s2 (4.6 ft/s2 )These are the representative values of the weighted root meansquare (rms) acceleration to which the hands and arms are sub-jected. These weighted rms values are measured according toISO 5349-1.• Whole body vibration levels do not exceed:0.22 m/s 2 (0.7 ft/s 2 )These are the representative values of the weighted root meansquare (rms) acceleration to which the whole body is subjected.These weighted rms values are measured according to ISO2631-1.The results are compliant to the limit and action vibration values (hand/arm and whole body) as specified in European directive 2002/44/EC.8.7 Hydraulic Pressures* Values for hard-packed surface shown. Values may differ depending on surface.** Charge pressure: 11.4 – 12.8 bar (165–185 psi).System Operating Pressure Relief Pressurebar psi bar psiDrive** 55–69 800–1000 200 2900Steering*—while turning 0–41 0–725 45–51 650–725Vibration—single drum 55–76 800–1100 200 2900
