Lifting and Transporting RD 12A22 wc_tx001556gb.fm3.2 Tying Down and Transporting the MachineSee Graphic: wc_gr003455Lock the articulated joint lockarm. Refer to section Articulation JointLockarm for information.When transporting the machine, place blocks in front of and behindeach drum and use the front and rear tie-down points (a) provided tosecurely fasten the machine to the trailer (two places). Secure themachine by attaching steel ropes or chains to the tie down points (a).Note: The transmission is normally braked when the engine is off, orwhen the hydraulic system is not functioning, unless there is a faultand/or the parking brakes have been manually disabled.NOTICE: Do not position ropes or chains across the machine frame orthe articulated joint when tying down the machine. Damage to themachine may occur.NOTICE: Do not use complete deflection of shock mounts when tyingdown the machine. Damage to the shock mounts may occur.NOTICE: Do not leave the machine tied down for extended periods oftime (except when transporting the machine). Damage to the shockmounts may occur.wc_gr003455a a
