RD 12A Operationwc_tx001071gb.fm 314.10 Lighting Equipment (if equipped)See Graphic: wc_gr005892When working in the dark or in bad visibility, use all the lights available.Replace broken bulbs immediately. Only replace bulbs when themachine is turned off. Remember that your safety and the safety ofothers depends on your care and attention when operating thismachine.Lights on (B)This switch position turns on the front and rear lights.Lights off (D)This switch position turns off all the lights.4.11 Seat BeltSee Graphic: wc_gr002238Pull seat belt (c) out of the retractor in a continuous motion.Fasten seat belt catch (b) into buckle (a). Make sure that the seat beltis placed low across the lap of the operator.The retractor will adjust the belt length and the retractor will lock inplace.Push the release button (d) on the buckle in order to release the seatbelt. The seat belt will automatically retract into the retractor.Replace the seat belt every three years.WARNINGwc_gr002238a bc d
