Operation RD 12A44 wc_tx001071gb.fm4.22 Parking Brake AdjustmentSee Graphic: wc_gr002953The parking brake is located on the rear drive motor drum support, andis used to prevent the roller from moving when the engine is turned off.Adjust brake for proper holding force as follows:4.22.1 Unscrew brake lever knob (42) until brake can be applied withmoderate force (approx. 30 lbs.).4.22.2 Start roller on level ground and try to travel forward and reverse withbrake applied. If roller drives through brake, stop machine, tightenlever knob one turn and repeat process.4.22.3 When machine no longer moves with brake set, stop machine, turnknob one more turn and brake is properly set.wc_gr002953NF R614210155554