Walker H24d Operator's Manual

Also see for H24d: Operator's manual

H24d Maintenance InstructionsCleaning61CAUTIONDo not operate the mower with deck tilt-uppivot joint UNLOCKED. Make sure lockingarms are in the LOCKED position and thetilt-up joint is rigid (locked).8. Remove tilt bar and stow on carrier frame.9. Move footrests to desired position.Transaxle HousingKeeping the housing on the transaxles clean andfree of obstruction is essential to avoid overheat-ing the transaxle fluid and shortening transaxlelife. The housing should be checked every 100hours and cleaned if necessary.To clean the housing, use compressed air and/or apressure washer. Pay close attention to any oilydirt buildup on the transaxle housings. This maybe the result of an oil leak. If an oil leak is noticed,contact your local Walker dealer.CoolingFinsTransaxle Housing and Cooling FinsIMPORTANT: In case an oil leak develops on theinput shaft, the cooling fan blowing dusty air and oilon the transaxle will quickly cover the housing andpack the cooling fins with oily dirt. If this conditionoccurs, contact your dealer immediately to avoidoverheating and damaging the transaxles.An additional procedure in maintaining transaxlecooling is to inspect the cooling fans. Replace thefan(s) if blades are missing or damaged.CoolingFansTransaxle Cooling Fans