Walker T25i Operator's Manual

Also see for T25i: Operator's Manual Safety, Assembly, Operating, and Maintenance Instructions Operator's manual

Contents

Safety Instructions17SAFETY, CONTROL, AND INSTRUCTION DECALSSafety, Control, and Instruction Decals are installed on the machine;if any are missing, illegible, or damaged, a replacement should be ordered and installed beforeputting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.Location: Front Body, LH Side Above MufflerPart Number: 8600-121. Warning – carbon monoxide (CO) poisoninghazard.• CO emitted by a running engine can be deadly.• Do not operate indoors or in other enclosedareas.8600-121.Location: Instrument PanelPart Number: 8823-6Location: Front Body Adjacent to RHSteering LeverPart Number: 8600-341. Warning – read Operator’s Manual before oper-ating the machine.Warning – wear eye and ear protection when op-erating the machine.2. Warning – roll-over hazard• Do not operate on slopes greater than 15degrees.3. Warning – thrown object hazard.• Keep bystanders away from the machinewhen operating.4. Warning – entanglement hazard.• Keep all guards in place while engine is run-ning.2.1. 3.4.Location: Gearbox Cover(Gear Drive Decks Only)Part Number: 8600-91. Tighten blade nuts on gear driven decks to60 lb·ft (81 N·m).1.8600-960 lb·ft (81 N·m)