Xerox 6030 User Manual

Also see for Wide Format 6030: User guide User guide Setup guide User guide Release note

Contents

Xerox 6030 User Manual Manual pdf 100 page image

98 Main Menu DocuWide 6030/6050• ADAPTIVE CONTRAST: scanned colors are first convertedto the SRGB color space, then enhanced using an adaptivecontrast algorithm. The adjustment changes the imageswhite point, black point,NOTE: Further color halftone image enhancement can be achievedwhen printing by enabling the Error Diffusion Raster Halftone Method inthe AccXES Print Server Web PMT. The setting is found on theProcessing Defaults page. Select Error Diffusion from the RasterHalftone Method pull-down menu.7. Press the Enter key the select the enhancement setting.8. Press the Next key to select NORMAL MODE then press theEnter key to select Normal Mode.9. Press the Previous of Next to scroll through the settings BESTIQ and FASTEST then press the Enter key to select the setting.BEST IQ is the default10. Press the Next key to select DYNAMIC BACKGROUNDSUPPRESSION. Then press the Enter key to enable/disableDYNAMIC BACKGROUND REMOVAL. Disabling the DYNAMICBACKGROUND REMOVAL enables the STATICBACKGROUND REMOVAL. DYNAMIC BACKGROUNDREMOVAL is the default and should be used for most documenttypes11. Press the Enter key to confirm the selection.12. Press the Exit key to return to the CONFIGURATION menu.The TIMERS option of the CONFIGURATION menu allows you to set thevalues for the time-out functions. Pressing any key or scanning adocument resets the timers.The timers are as follows:• FEATURE - Controls how long the current feature parametersremain in effect after the last key press, scan completion, orinsertion of a document into the SCAN SYSTEM. TheFEATURE timer can be set between 0 and 99 minutes. Thefactory default is 5 minutes. A value of 0 means that the featurewill never time out.NOTE: To prevent images from being lost, feature time-outs will notoccur during the sets build process.• PRINTER INTERRUPT - Controls how long the Printer remainsin the interrupted state with no interruption at the SCANSYSTEM Control Panel. This timer pertains to print jobs thathave been interrupted to allow a copy job to process. Theallowed range is 1 to 99 minutes. The factory default is 1minute.• FILE DELETION - Specifies the maximum amount of time ascanned image file remains on the file system before beingdeleted. This timer pertains only to files scanned when theTIMERS