Xerox 6030/6050 Wide Format Copy System Special features keys 73Transform keyThe Transform feature contains the following menu choices:• MARGINS - Allows you to adjust the dimensions of the marginsaround the image. By entering positive margins, blank space isinserted around the image. By entering negative values,unwanted parts of the image can be cropped.• JUSTIFICATION - Allows you to adjust the position of the imageon the media.• TRANSFORM - Allows you to request transformation of thescanned image into a mirror image, a negative photographicinversion, or both.NOTE: The image can also be rotated. Refer to "Imaging" in the "CopyOptions" section for further information about image rotation.To access the TRANSFORM MENU:1. Press the Transform key. The TRANSFORM MENU screen isdisplayed. The selected option is highlighted.TRANSFORM MENUMARGINSJUSTIFICATIONTRANSFORM2. Press the Previous or Next key to highlight the desired option.3. Press the Enter key to select the highlighted option. The screenfor the selected option is displayed.The MARGINS option of the TRANSFORM MENU allows you to selectthe dimensions for the margins that surround an image. These marginsare referred to as the lead, left, right and trail edges.NOTE: Margins can only be adjusted when the Xerox 6030/6050 WideFormat Copy System is in the COPY mode.The example below illustrates an image entering the SCAN SYSTEMand the orientation of the image margins.ScannerLeft imageedgeRight imageedge TrailedgeLeadedgeMargins
